You can win this engine, no purchase necessary. All you have to do is attend the Chrysler’s at Carsile event this July 09. The engine will be given away on Sunday afternoon and you must be present to win. For exact details check out the web site http://www.carlisleevents.com/ce/events/chrysler-nationals/ .

Last year we built a 505” 440 that made just over 600 HP and 660 ft/lbs of torque. For this years project we decide to do a low deck engine and tone down the power output a little do make a more docile yet still VERY strong combination. The exact output of the engine is being withheld as there maybe some sort of giveaway to who can guess how much power it made. Don’t quote me on that because details have not been finalized.

The engine: We based this year’s giveaway on a 383. We chose our Muscle Motors brand stroker kit featuring a 4.25 stroke. H-beam rods, Diamond pistons and Clevite bearings and Federal Mogul rings complete this balanced rotating assembly. Milodon supplied the ultra low profile oil pan, windage tray, HV oil pump, bronze distributor drive, and Stainless Steel valves for the heads. Comp Cams supplied the timing chain, hydraulic roller cam & lifters, valve springs, locks, retainers, seals, pushrods and 8620 Chromemoly steel rocker arms. The heads we decided to keep the “sleeper look” by using a set of Muscle Motors CNC ported 906 cylinder heads. The idea behind CNC porting a set of 906’s is maximum flow yet maintaining a OEM appearance. There are more cost effective ways to get a set of good flowing heads. The Edelbrock Performer RPM would be more cost effective but again our goal was to maintain a “sleeper” appearance. The heads are topped off with a Edelbrock Performer RPM intake and a Quick Fuel 830 cfm Super Street carb.

This 489 cubic inch 383 with 906 heads and a hydraulic roller cammed engine has a 1960’s appearance with 2000’s technology. No one will know your “383” has a Stroker rotating assembly, hydraulic roller cam, and CNC ported, unleaded compatible heads. This engine will be right at home in any Mopar engine bay. Make sure you attend the 2009 Chrysler’s at Carsile for your chance to win this engine FOR FREE!!!!!

2009 Engine giveaway Presented by:

Muscle Motors
Mopar Muscle Magazine
Carsile Events
Comp Cams
Diamond Racing Products
Edelbrock
Federal Mogul
Mahle/Clevite
Milodon
Quick Fuel Technology